PCS logo with the three letters P, C, and S and the words konferenztechnik.de

Who are you? We work for a wide variety of customers and know the demands, zeitgeist and development of the industries.

 

We serve all sectors of conference and media technology and are among the market leaders in simultaneous, interpreting and multilingual events.

We always try to satisfy the needs of our customers in the best possible way. Our fair and cooperative approach is the guarantee for your successful project and the strategic basis of our long-term success.

 

We do not bite. And we don't annoy – well, sometimes we do. Now and then. Rarely. Almost never.

 

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Wireless discussion systems

Microphone systems completely without cables – the advantages are obvious: Fast and very flexible setup, easy change of seating arrangement or table arrangement, easy mobile use and quick conversion between different premises. Modern wireless discussion systems – as we offer – all work by radio on 2.4 GHz and partly already on 5 GHz. They are of course tap-proof! Usually the microphone units are available in different versions: with and without built-in loudspeaker, optionally with voting function and/or simultaneous function. With the latter, each delegate can connect a headset to the microphone unit and retrieve his desired translation.

For technology providers and installation companies, we would like to point out that PCS will also be happy to provide in-depth support for the installation and integration of these wireless systems into existing systems. Also through our rental department of PCS Professional Conference Systems GmbH, a lot of practical experience has been gained with most of the offered wireless systems. Profit from this advantage!

[spacer size="40″]
[column size="1-2″ last="0″]

Beyerdynamic Quinta

[/column]
[column size="1-2″ last="1″]
beyerdynamic_logo_print
[/column]

Beyerdynamic has been producing wireless conference systems since 1998 and can thus draw on a wealth of experience in this field. The market penetration with systems of this type is correspondingly large, so that a high degree of compatibility can be guaranteed. Beyerdynamic has repeatedly been able to attract a great deal of attention and praise with its innovative microphone unit designs, including the new Quinta, which is now the fifth generation of wireless systems. The Quinta was awarded a prize at the "red dot design award 2012" and is of course also technically "state of the art".

Beyerdynamic Quinta microphone units

The Quinta wireless conference system is already the fifth generation of wireless conference technology at Beyerdynamic. The discussion system meets all requirements in terms of operational safety, reliability and transmission security. If interference to radio traffic, e.g. from WLAN or cell phones, occurs during an event, the system automatically and inaudibly switches to a new channel so that the conference is not affected. Wireless transmission allows the system to be set up and taken down quickly, and the microphone units can be flexibly positioned on the table. After the event, the microphone units can be conveniently stored in the wheeled transport case, where they are also automatically recharged. Different configuration options and a wide range of accessories round off the system.

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Quinta CU control unit

[column size="2-5″ last="0″]

Quinta CU control unit

[/column]
[column size="3-5″ last="1″]

The Quinta CU control center can be used to manage and control up to 150 delegate and presidential speaking positions. Up to four speakers can speak simultaneously. Three frequency bands are available for radio transmission (triple-band operation 2.4 / 5.2 / 5.8 GHz). The frequency bands can be switched automatically or manually, silently even during operation. The Quinta CU can be operated via the built-in display or via smartphone or tablet PC.

[/column]
[/tab]
[tab title="Technical details"]

Quinta CU control unit

[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Intercom stations Quinta MU

[column size="2-5″ last="0″]

Beyredynamic Quinta microphone unit MU

[/column]
[column size="3-5″ last="1″]

Three different microphone units are available for the Quinta conference system: The Quinta MU 23 chairman microphone unit with three buttons (microphone, delete, function), the Quinta MU 22 dual delegate microphone unit with two microphone buttons, and the Quinta MU 21 delegate microphone unit with one microphone button.

[/column]
[/tab]
[tab title="Technical details"]

Intercom stations Quinta MU

The microphone units have a lockable XLR connector that can be used with a detachable gooseneck microphone. The buttons are backlit in 3 colors and have braille above the buttons. All microphone units have an integrated wideband speaker with speech equalization.

[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Loading and transport

[column size="2-5″ last="0″]

Beyerdynamic Quinta charging case

[/column]
[column size="3-5″ last="1″]

Up to 10 microphone units can be transported and charged in the modular Quinta CC2 charging and transport case. The control unit is located in the bottom compartment.

[/column]
[/tab]

[tab title="Details"]

Loading and transport

[/tab]
[/tabs]
[spacer size="40″]
[column size="1-2″ last="0″]

Beyerdynamic MCW Digital-50

[/column]
[column size="1-2″ last="1″]
beyerdynamic_logo_print
[/column]

Beyerdynamic MCW-D 50

The simple and convenient operation of the MCW-D 50 offers all the functionalities required for stand-alone operation or even for use with a media control system in complex conference operations. The signal transmission offers security compared to other wireless applications and the 128-bit encryption allows a maximum of eavesdropping security even in mobile use.

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

MCW-D 521 and 523 Intercom stations

[column size="2-5″ last="0″]

Intercom stations MCW-D 521

[/column]
[column size="3-5″ last="1″]

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Central MCW-D 50

[column size="2-5″ last="0″]

MCW-D 50 control unit

[/column]
[column size="3-5″ last="1″]

Digital control center for managing an almost unlimited number of wireless intercom stations.
It is equipped with an integrated diversity antenna switch. Depending on the version, up to three or nine active microphone units can be used simultaneously. The entire system can be configured and controlled via the serial interface using free software.
The control unit can encrypt the data channel to the microphone units in security mode.

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Charging case CC10

[column size="2-5″ last="0″]

CC10 charging and transport case

[/column]
[column size="3-5″ last="1″]

Loading and transport case in modular system for 10 microphone units.

For integration of the control center and other sound reinforcement components as an all-in-one solution, the 19-system floor CM-10 is offered. On request, the case system can also be supplied as a robust flight case version and in various colors.

[/column]
[/tab]
[/tabs]

[spacer size="40″]
[column size="1-2″ last="0″]

Bosch Dicentis –
Wireless conference system

[/column]
[column size="1-2″ last="1″]
Bosch Logo
[/column]

Bosch Dicentis Wireless Conference System
[spacer size="40″]

The new Dicentis wireless conference system from Bosch impresses with its simple operation and professional features.

The Dicentis system is based on standard WLAN frequencies in the 2.4 and 5 GHz range. Intelligent frequency selection ensures guaranteed interference-free wireless conferences. The management of the individual devices works smart and also wirelessly. Wireless touch-screen devices with integrated NFC reader ensure a first-class conference experience and many expansion options. The system is compatible with the OMNEO standard and thus ideally equipped for future expansion, e.g. with Bosch DCN multimedia systems.

The 4.3” capacitive touch screen is designed for fast, intuitive operation. Your company logo can be uploaded to personalize the device. This an attractive feature for organizations or even rental business. The system can be upgraded with additional software modules to extend its functionality: for example, voice recognition or identification using the NFC card.

The Dicentis system is configured using an integrated web browser. It is controlled using a laptop or tablet, without any additional software. Moreover, no additional router is required. Two systems can be set up redundantly to ensure maximum reliable communication.

[spacer size="20″]

[spacer size="40″]
[column size="1-2″ last="0″]

Bosch DCN Next Generation –
Wireless conference system

[/column]
[column size="1-2″ last="1″]
Bosch Logo
[/column]

[tabs style="1″]
[tab title="Article"]

Intercom station Concentus DCN-CONFF

[column size="2-5″ last="0″]

Intercom station Concentus DCN-CONFF

[/column]
[column size="3-5″ last="1″]

DCN-CON is the standard delegate conference unit that allows participants to speak, register a request to speak, listen to the speaker and vote.
The flat diaphragm loudspeaker offers very good acoustics with minimal feedback, thus increasing speech intelligibility.
Five tuning keys are available for all types of tuning. An external contact is available for connecting external fingerprint readers.

[/column]
[/tab]
[tab title="Technical details"]

Intercom station Concentus DCN-CONFF

Controls and displays:

[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Call station DCN-WD-D

[column size="2-5″ last="0″]

Call station DCN-WD-D

[/column]
[column size="3-5″ last="1″]

Using the DCN-WD-D wireless discussion unit, participants can speak, register a request to speak, and listen to the speaker.

Other features include:

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Central DCN WCCU

[column size="2-5″ last="0″]

Central DCN WCCU

[/column]
[column size="3-5″ last="1″]

The DCN-WCCU is the core of the DCN wireless system. It can control up to 150 wireless discussion units and 95 DCN Next Generation wired units. The Wireless Central Control Unit (WCCU) uses Bosch's proprietary optical network to effortlessly connect to the Wireless Access Point and other Bosch convention equipment. Networks can be set up as stub cabling or a redundant ring, depending on the equipment installed. The wireless central control unit is equipped with two jacks for DCN system main cables that allow connection to DCN-IDESK interpreter consoles. In conjunction with a PC and the control software (DCNSWSMV), the wireless central control unit enables optimized conference control.

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Wireless Access Point DCN-WAP

[column size="2-5″ last="0″]

Wireless Access Point DCN-WAP

[/column]
[column size="3-5″ last="1″]

The DCN Wireless Access Point (WAP, wireless access point) connects the Wireless Central Control Unit (WCCU) to the wireless discussion units. For security reasons, the data exchange between the WAPs and the wireless discussion units is digitally protected. The WAP is connected to the WCCU via Bosch's proprietary optical network, which provides digital, optical communications and power over a single cable. With the second optical network port on the WAP, the system network configuration can be expanded from stub cabling to a redundant ring. In this loop-through configuration, the DCN wireless system can be connected to compatible Bosch equipment such as audio expanders, CobraNet interfaces and the INTEGRUS audio transmission system. Secure wireless communication between the WAP and the discussion units takes place on the 2.4 GHz band, which can be used worldwide without a license. The WAP features an award-winning design. It can be mounted unobtrusively on a wall, ceiling or floor stand using the universal mounting bracket.

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Carrying case DCN-WFCD10

[column size="2-5″ last="0″]

Carrying case DCN-WFCD10

[/column]
[column size="3-5″ last="1″]

DCN-WFCD10 Flightcase, light gray, space for 10 wireless discussion units and 2 chargers

[/column]
[/tab]
[/tabs]

[spacer size="40″]
[column size="1-2″ last="0″]

Televic Cofidea Wireless

[/column]
[column size="1-2″ last="1″]
Televic Logo
[/column]

The Confidea wireless system offers high flexibility and security. Using intelligent multiband wireless technology, the system automatically searches for an interference-free radio path to ensure clean transmission. The signal is also encoded with a 128-bit encryption algorithm to protect against unauthorized listening.
By using the 5 GHz band as an extension of the conventional WLAN frequencies, multiple systems in a building can be used in multi-room applications without any problems. In addition, the system can switch to free channels at any time in the event of interference from WLAN.

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Confidea Wireless Intercom stations

[column size="2-5″ last="0″]

Confidea Wireless Intercom stations

[/column]
[column size="3-5″ last="1″]

The wireless call stations offer 128-bit encryption and battery runtimes of up to 20 hours. There are different versions whose range of functions varies according to requirements.

The following microphone units with different features are available:

Just contact us, we will configure the system exactly according to your needs

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Confidea Wireless Access Point WCAP

[column size="2-5″ last="0″]

Confidea Wireless Access Point WCAP

[/column]
[column size="3-5″ last="1″]

The access points control the call stations. They are extremely small and cascadable if required.

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Control unit – Central Unit CPU5500

[column size="2-5″ last="0″]

Control center - Central Unit CPU5500

[/column]
[column size="3-5″ last="1″]

The CPU 5500 Central Unit is required when the additional special functions of the Confidea system are to be used. These include:

On the front panel there is a display that can be used to configure the system. It is also possible to make all settings via a connected computer. For monitoring purposes, a speaker and a headphone jack are available.

[/column]
[/tab]
[tab title="Connections"]

Control unit – Central Unit CPU5500

Connections:

The control unit is also available in other configurations, just contact us and we will help you choose the right system.

[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Televic Confidea Wireless CHC Charging and Carrying Case

[column size="2-5″ last="0″]

Televic Confidea Wireless CHC Charging and Carrying Case

[/column]
[column size="3-5″ last="1″]

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Televic Confidea Wireless BP Battery

[column size="2-5″ last="0″]

Televic Confidea Wireless BP Battery

[/column]
[column size="3-5″ last="1″]

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Televic Confidea Wireless CHT Charging Unit

[column size="2-5″ last="0″]

Televic Confidea Wireless CHT Charging Unit

[/column]
[column size="3-5″ last="1″]

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Televic Confidea MIC38SL microphone for microphone units

[column size="2-5″ last="0″]

Televic Confidea MIC38SL microphone for microphone units

[/column]
[column size="3-5″ last="1″]

[/column]
[/tab]
[/tabs]

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Confidea Control Software

[column size="2-5″ last="0″]

Confidea Control Software

[/column]
[column size="3-5″ last="1″]

Different management software versions are available for the Confidea system. With these, different functions of the system can be controlled by computer. In addition, you get different additional functions that allow a comfortable conference execution.

[/column]
[/tab]
[tab title="Technical details"]

Confidea Control Software

The following software packages are available:

For more detailed information about the software packages, please contact our sales representatives.

[/tab]
[/tabs]

Sennheiser

[spacer size="20″]
[tabs style="1″]
[tab title="Article"]

Information on the discontinued WICOS system

[column size="2-5″ last="0″]

Sennheiser WICOS

[/column]
[column size="3-5″ last="1″]

The WICOS system has been removed from Sennheiser's product portfolio and is no longer available from the manufacturer. However, PCS still offers the complete service around the system. This includes maintenance and repair work or the ordering of spare parts and replacement equipment (while stocks last).
Please contact our service department for any questions regarding this topic.

[/column]
[/tab]
[/tabs]

We are looking forward to your application!

Just send us a short application by e-mail to: Gunnar Hermenau
hermenau@konferenztechnik.de

Please send us your application as a PDF file. It would be nice to have a short letter of motivation, a CV and – if available – relevant references.

If you have any questions, just contact Gunnar Hermenau at: 030 6959690 14 or by e-mail.